GlobalVariable: see-all t/f
This variable is true if everything in the world, units, terrain, etc,
is always visible at all times, including initially.
It takes precedence over all other visibility and spying parameters.
Defaults to false.
GlobalVariable: see-terrain-always t/f
If this variable is true, then any side that has seen the terrain of a cell
will be informed if that terrain ever changes.
Defaults to true.
UnitTypeProperty: see-always t/f
This property is true when a unit is always visible
after it has been seen once,
so that side changes, movements, etc will be seen forever afterwards.
If the unit moves into terrain that has not been seen,
then that terrain also becomes seen as well.
Defaults to false.
UnitTypeProperty: see-occupants t/f
This property is true when a unit's occupants are also seen
whenever the unit itself is under observation.
Defaults to false.
UnitTypeProperty: spot-action t/f
If this property is true,
then the unit's chance to be seen by other sides will be
tested each time the unit acts in any way.
This property is in addition to the check at the beginning of each turn.
Defaults to true.
The people in a cell effectively view (for their side) all units in that cell. Some units can hide from the people.
Table: people-see-chance u m -> n%
This table is the chance that the people of the
given type m will see a unit of type u.
This will be evaluated for each people type individually,
once at the beginning of each turn, and once for each populated cell
that the unit enters during the turn.
Defaults to 100.
UnitTypeProperty: vision-range dist
This property is the maximum range of vision coverage by the unit.
A value of -1 disables all vision,
0 means only units in the same cell may be seen,
and 1 means units in adjacent cells may be seen.
Defaults to 1.
Table: see-chance-at u1 u2 -> n%
This table is the chance that a unit u1 will see
another sides's unit of type u2 when both are
in the same cell.
Defaults to 100.
Table: see-chance-adjacent u1 u2 -> n%
This table is the chance that a unit u1 will see
another sides's unit of type u2 when the two
are in adjacent cells.
Defaults to 100.
Table: see-chance u1 u2 -> n%
This table is the base chance that a unit u1
will see a unit u2 in cells at distance 2 or greater.
Defaults to 100.
Table: visibility u t -> n
This table is the effect of terrain t
on a unit u's chances of being seen.
Values less than 100 are reduced visibility,
values greater than 100 increase the unit's
chances to be seen.
Defaults to 100.
Table: vision-night-effect u t -> n
This table is the multiplier for unit u's vision at night
in each type of terrain t.
Effect is to multiply with both vision range and see-chance.
Defaults to 100.
Table: see-material-always t m -> t/f
GlobalVariable: see-weather-always t/f
If true, then weather changes (in cells that have been seen) will always
be reported. Defaults to true.
Table: see-mistake-chance u1 u2 -> .01n%
This is the chance that a unit of type u1 will see a unit of
type u2 as some other type. The type of unit seen instead
is determined by the table looks-like.
Table: looks-like u1 u2 -> n
This table is the set of weights indicating which type u2 a unit
of type u1 is most likely to be mistaken for. When a unit makes a
viewing mistake, then the program adds up all the weights and chooses
randomly according to weight. Defaults to 0, which means that
u2 never looks like u1.
UnitTypeProperty: vision-bend n
This property is the amount by which a unit can see "around corners".
0 means that vision is strictly line-of-sight, while 100 means that
elevations never obstruct vision. Defaults to 100.
Table: eye-height u t -> elev
This property is the additional elevation above the unit's position that a unit can see with, when in the given terrain.
Table: body-height u t -> elev
This propety is the effective height of the main visible part of a unit, when in the given terrain.
TerrainTypeProperty: thickness elev
This property is the thickness of the terrain, which is the difference between the "ground" of the terrain and its top.
When is unit is being tracked, then the sides doing the tracking can see the unit move around, even if the cell is not being covered by any of the sides' own units. If this is enabled, then particular units enable tracking, and the chance of losing track depends on the terrain.
Table: track-chance u1 u2 -> .01n%
This table gives the chance that u1's side will be able to track a unit of type u2 that is within range (same or adjacent cell).
Table: lose-track-chance u t -> .01n%
This table gives the chance that each side tracking a unit will lose that track when the unit enters terrain of type t.
A unit type can also be specified to do spying automatically. The outcome of spying is calculated once/unit/turn, at the beginning of the turn (after move calculation but before any players can do anything). Spying can happen to any unit not on the spying unit's side.
UnitTypeProperty: spy-chance .01n%
This property is the chance that the unit will be successful at spying.
UnitTypeProperty: spy-range dist
This property is the maximum distance at which the unit will find out something by spying.
Table: spy-quality u1 u2 -> n%
This table gives the chance that u1's spying will return information
about a unit of type u2 that is within the spying range.
Defaults to 100.
Table: spy-track-chance u1 u2 -> .01n%
This table is the chance that if u1's spies return information about a unit of type u2, the unit will also become tracked by the spy's side.